Dish Towels

8/2 cotton woven on an 8 shaft loom.

A Scarf in Soft Mardi Gras Colors

24 ends per inch, 10/2 bamboo for warp and weft. 4 shaft loom.

Another scarf off the loom

A lightweight scarf made on the small rigid heddle loom.

Dish Towels on the Loom

Trying some different dish towel patterns on the 8 shaft loom. Here is towel 1 in progress.

DIY Weaving Temple

Tarp clip versions of the weaving temple works well, but you don’t want the weighted string to pull down the edges of your weaving. The addition of a stick on both sides of the ashford table loom helps the string stay horizontal. I opted to use a light painter’s tape to hold down the stick in the front and tied to do so on the back. Do what works for you; just make sure that how it is placed doesn’t interfere with the operation of your front or back ratchets and doesn’t hamper your ability to throw your shuttle.

DIY Warp Weights

Why purchase these when they are so easy to make. And while, you can use s hooks, pill botttles, etc as weights, I really prefer these and especially like that you can adjust the weight by adding or removing washers.

DIY Castle Lights

Some direct lighting over he heddles makes a world of difference. I chose not to attach the lights directly to the loom as I wanted to make no permanent changes to the loom. These are removable and they work great.

DIY Shuttle Race

Floor looms have a feature called a shuttle race, which is a nifty little ledge upon which the weaving shuttle can travel. Unfortunately most table looms do not have this feature. Without it, the shuttle may not travel well, falling through the threads and landing on the floor as often as it exits the shed safely. I wanted to add a race without making permanent changes to the loom, and many solutions I saw did not work with my Ashford table loom because the warp threads do not rest at the bottom of the reed. I was placing a yard stick in the shed to allow the shuttle to travel across (works, but it is a slow way to weave) when this idea came to me. You might have to play around a bit to get the stick placed just right, but I hope someone else benefits from my sharing. It works great for my Ashford table loom.

Weaving Loom DIY Projects

Sometimes your loom needs a few extras, either purchased or homemade. I am posting four DIY projects that have worked well for my Ashford table loom: a shuttle race, castle lights, a weaving temple, and warp weights.

Stroller Blanket?

This little blanket made on my 8 shaft table loom has a great feel, though it is much smaller than originally planned. I used ‘mallo’ cotton from Gist Yarn & Fiber, and it has a wonderful hand at 16 epi. I hope to make a larger one when they have more of this yarn available.

Rate this:

Rate this:

Rate this:

Rate this:

Rate this:

Rate this:

Rate this:

Rate this:

Rate this:

Rate this: